The Halo Sport app will report poor contact when the headset is not making adequate contact with your head, and therefore cannot begin stimulation. The most important thing to remember when starting your Neuropriming Session is to make sure the Primer nibs are dark grey and very wet. If water is dripping from the Primers that is OK and will create better contact.
The Halo Sport app displays indicator bars at the top to show how well the Headset is making contact. Fewer bars means better contact. When you have good contact, the Start Screen will appear and you can start your Neuropriming Session.
1. For first time use, it is recommended to run each Primer under the sink or water fountain for 20+ seconds each. They will be very dry when you first unbox them, and they need to be very wet to deliver stimulation. (For future stimulation sessions, 10 seconds under the faucet should be enough).
2. Make sure the Halo Sport headset is properly positioned on your head like a pair of over-the-ear headphones. For best results, make sure the Primers first touch your head / hair when the headset is in position (Don’t comb the headset from the front of your head into position as it will dry out the Primers). Make sure the headset is snug against your scalp by pressing down on either side of the Halo Sport headset and on the top.
3. Wiggle the Primers down through your hair to ensure they are getting the best possible contact with your scalp and not your hair.
4. If you are still having trouble, remove the headset and re-wet the Primers using the spray bottle and tap water (or, preferably, place the Primers under running tap water for 10 seconds each). Again, the more wet they are, the better. Re-insert the Primers, and place the headset back on your head making sure it is snug against your scalp.
5. If you're still having trouble with poor contact, try using the spray bottle to wet the portion of your hair where the Primers make contact with your head. This will be especially helpful if you have thick hair.
Check out this video for a walkthrough of our poor contact troubleshooting tips:
key words: poor contact, connection, contact screen, page, prompt, pop-up, yellow bars, orange bars, impedance