What's a Recharge Kit?
In your Halo Sport package, you will find a recharge kit. This includes a tray and solution to recharge your Primers. Your Primer's "nibs" act like sponges - they absorb water to help make good contact with your scalp. Over many uses, this ability to absorb water may decrease, which makes it harder to get good contact. If you notice this happening, you can use the Recharge Pack to restore your Primers' ability to absorb water quickly. In normal cases, this won't be necessary until after many sessions; if you clean the Primers vigorously, then you may need to use a Recharge Pack sooner.
To purchase additional Recharge Kits or Primers, click here.
How to Perform a Primer Recharge
Note: For best results, your Primers should be completely dry before completing a recharge.
To recharge your Primers, follow these steps:
1. Dispense the contents of one recharge pack into the provided tray.
2. Place one of the Primers in the tray, with the nibs facing down. Use your palm to apply a good amount of downward pressure to the back of the Primer, so that the nibs compress sideways and become submerged in the liquid.
3. Continue to apply pressure to the back of the Primer for 15-20 seconds. Shift the Primer's nibs back and forth repeatedly between presses to ensure that all sides of the Primer's nibs become saturated with the solution.
4. Remove the Primer, and repeat these steps with the remaining two Primers.
The Primers can be used right after being recharged, with no addition of water. It is best not to apply water to the Primers immediately following a recharge, because the recharge fluid may be rinsed out by the water.
tags: recharge pack, recharge tray, recharge solution, recharging, packet, poor contact